Desktop Power Supply Adapter Tech ATS 160TS-P
Item number: 820357
Desktop Power Supply Adapter Tech ATS 160TS-P
Based on Gallium Nitride (GaN FET) Transistors – Smaller Form Factor, Higher Efficiency and Power Density Compared to Conventional Silicon MOSFET Technology
Powerful, efficient power supply. Versatile for use in information technology and audio/video applications.
Thanks to its wide input range, this power supply is suitable for worldwide operation. The output voltage is stabilized. The switch-mode power supply features high efficiency, resulting in low heat generation.
Highlights
- High power density (+208%)*
- Switching frequency 200 kHz
- Energy efficiency according to DoE Level VI
- Electromagnetic emissions according to EN 55032 - Class B
- Overvoltage protection
- Overload protection
- Short-circuit protection
- IEC/EN 62368-1; IEC 60950-1 compliant
Specifications
This power supply is available in a variety of configurations and voltages upon customer request.
Note
For further information, please refer to the datasheet. We are happy to assist you in finding the right power supply for your project.
*Power density increased compared to conventional power supply technology (10.0 W/in³ vs. 4.8 W/in³)
Properties
| Type: | Desktop |
|---|---|
| No. of Output Voltages: | 1 - Single |
| Application: | IT Technology |
| Protection Class: | Protection Class I |
| Input Connector: | C14 Socket |
| Output Connector: | DIN Plug |
| For Region: | Europe, Japan, Taiwan, USA / Canada |
Downloads
External Power Supplies (Plug-in and Desktop Power Supplies)
Find practical answers to frequently asked questions about our external plug-in and desktop power supplies for industrial, medical, and IT applications. These articles support you with selecting the appropriate model, navigating country-specific mains plug options, and ensuring safe commissioning and troubleshooting.
Worauf muss ich bei der Auswahl eines passenden externen Netzteils achten?
For an external power supply unit (e.g. a desktop power supply) to operate safely, four criteria must match your device: voltage, current, polarity, and connector dimensions. You will usually find the required ratings on your device’s rating plate (typically under "Input") or on your previous power supply under "Output".
- Voltage (volts / V) – must match exactly: The output voltage of the power supply unit must match your device's input voltage precisely. Excessive voltage can permanently damage the electronics; insufficient voltage will cause the device not to start or to run unstably.
- Current (amperes / A) – may be higher: The power supply unit must supply at least the current required by the device. A higher ampere or wattage rating on the power supply poses no risk, as the device only draws the current it actually requires.
- Polarity – must match: Check the polarity symbol on the device. DC barrel connectors are usually centre-positive (positive pole inside). The replacement power supply must have identical polarity.
- Connector dimensions (DC barrel connector): The connector must fit securely and smoothly into the socket. Common dimensions specify the outer and inner diameters (e.g. 5.5 × 2.1 mm or 5.5 × 2.5 mm). If socket dimensions are non-standard or unclear, universal power supplies with an adapter set can help.