Desktop Power Supply Adapter Tech ATS 200TS-A
Item number: 820366
Desktop Power Supply Adapter Tech ATS 200TS-A
Based on Gallium Nitride (GaN FET) – Smaller Form Factor, Higher Efficiency and Power Density Compared to Conventional Silicon MOSFET Technology
This is a powerful, efficient power supply suitable for IT and audio/video applications.
Thanks to its wide input range, the power supply is suitable for worldwide use. The output voltage is stabilized, and the switch-mode design provides high efficiency with minimal heat generation.
Highlights
- High power density (+250%)*
- Switching frequency: 200 kHz
- Energy efficiency according to DoE Level VI
- Electromagnetic emissions according to EN 55032 – Class B
- Overvoltage protection
- Overload protection
- Short-circuit protection
- IEC/EN 62368-1; IEC 60950-1 compliant
Specifications
This power supply is available in a variety of configurations and voltages upon customer request.
Note
Further information is available in the datasheet. Please contact us for assistance in selecting the right power supply for your project.
*Power density increased compared to conventional power supply technology (12.5 W/in³ vs. 5.3 W/in³)
Properties
| Type: | Desktop |
|---|---|
| No. of Output Voltages: | 1 - Single |
| Application: | IT Technology |
| Protection Class: | Protection Class II |
| Input Connector: | C8 Socket |
| Output Connector: | DIN Plug |
| For Region: | Europe, Japan, Taiwan, USA / Canada, China |
Downloads
External Power Supplies (Plug-in and Desktop Power Supplies)
Find practical answers to frequently asked questions about our external plug-in and desktop power supplies for industrial, medical, and IT applications. These articles support you with selecting the appropriate model, navigating country-specific mains plug options, and ensuring safe commissioning and troubleshooting.
Worauf muss ich bei der Auswahl eines passenden externen Netzteils achten?
For an external power supply unit (e.g. a desktop power supply) to operate safely, four criteria must match your device: voltage, current, polarity, and connector dimensions. You will usually find the required ratings on your device’s rating plate (typically under "Input") or on your previous power supply under "Output".
- Voltage (volts / V) – must match exactly: The output voltage of the power supply unit must match your device's input voltage precisely. Excessive voltage can permanently damage the electronics; insufficient voltage will cause the device not to start or to run unstably.
- Current (amperes / A) – may be higher: The power supply unit must supply at least the current required by the device. A higher ampere or wattage rating on the power supply poses no risk, as the device only draws the current it actually requires.
- Polarity – must match: Check the polarity symbol on the device. DC barrel connectors are usually centre-positive (positive pole inside). The replacement power supply must have identical polarity.
- Connector dimensions (DC barrel connector): The connector must fit securely and smoothly into the socket. Common dimensions specify the outer and inner diameters (e.g. 5.5 × 2.1 mm or 5.5 × 2.5 mm). If socket dimensions are non-standard or unclear, universal power supplies with an adapter set can help.