Open Frame Power Supply SINPRO HBU100
Item number: S-HBU100
Open Frame Power Supply SINPRO HBU100
High-quality, powerful power supply for medical applications.
The power supply complies with applicable medical standards (EN 60601-1). It features two protective measures to safeguard patients against electric shock (2MOPP). It is suitable for operating a wide range of devices in diagnostic and therapeutic environments.
Wide input range from 100V/AC to 240V/AC. The output voltage is stabilized. The switched-mode power supply has high efficiency, resulting in low heat generation.
Highlights
- Protective measures: 2MOPP
- Protection class 1 (with protective earth)
- Overvoltage protection
- Overload protection
- Short-circuit protection
- EN 60601-1; EN 60601-1-2; EN 55011
Specifications
This power supply is available in a wide range of configurations and voltages upon request. The required output voltage must be specified when ordering and cannot be adjusted afterwards.
Available output voltage (fixed setting):
From 11 V/DC to 50 V/DC
Max. power: 100 W
Note
Further information can be found in the datasheet. Please contact us — we will be happy to help you find the right power supply for your project.
Properties
| No. of Output Voltages: | 1 - Single |
|---|---|
| Application: | Medical |
| Protection Class: | Protection Class I |
| Input Connector: | Plug Contact |
| Output Connector: | Plug-In Contact |
| For Region: | Europe, USA / Canada |
Downloads
External Power Supplies (Plug-in and Desktop Power Supplies)
Find practical answers to frequently asked questions about our external plug-in and desktop power supplies for industrial, medical, and IT applications. These articles support you with selecting the appropriate model, navigating country-specific mains plug options, and ensuring safe commissioning and troubleshooting.
Worauf muss ich bei der Auswahl eines passenden externen Netzteils achten?
For an external power supply unit (e.g. a desktop power supply) to operate safely, four criteria must match your device: voltage, current, polarity, and connector dimensions. You will usually find the required ratings on your device’s rating plate (typically under "Input") or on your previous power supply under "Output".
- Voltage (volts / V) – must match exactly: The output voltage of the power supply unit must match your device's input voltage precisely. Excessive voltage can permanently damage the electronics; insufficient voltage will cause the device not to start or to run unstably.
- Current (amperes / A) – may be higher: The power supply unit must supply at least the current required by the device. A higher ampere or wattage rating on the power supply poses no risk, as the device only draws the current it actually requires.
- Polarity – must match: Check the polarity symbol on the device. DC barrel connectors are usually centre-positive (positive pole inside). The replacement power supply must have identical polarity.
- Connector dimensions (DC barrel connector): The connector must fit securely and smoothly into the socket. Common dimensions specify the outer and inner diameters (e.g. 5.5 × 2.1 mm or 5.5 × 2.5 mm). If socket dimensions are non-standard or unclear, universal power supplies with an adapter set can help.