Switch Mode Power Supply SUNPOWER SPS 225P
Item number: 820387
Switch Mode Power Supply SUNPOWER SPS 225P
High-Quality Switching Power Supply Suitable for Industrial, IT, and Audio/Video Applications
Design
- Low operating costs due to high energy efficiency, P.F. > 0.95
- Output voltage adjustable ±10%
- Remote sense for output voltage
- Remote control ON/OFF
- Standard mounting bracket, compatible with products from other power supply manufacturers
- Long service life thanks to high-quality components, high MTBF rate
- Protection against overload, overvoltage, and short circuit with automatic restart
- Wide-range voltage input (AC and DC)
- Extended temperature range up to 70 °C with derating
- Usable up to 5000 m above sea level
- High efficiency through modern circuit design
- No minimum load required
- Tested according to EN, UL, CB. International use
* Remote ON/OFF Function:
Standard function: Voltage 0 V ~ 0.8 V = Power ON, 4 V ~ 10 V = Power OFF
Reverse RC (optional): Voltage 0 V ~ 0.8 V = Power OFF, 4 V ~ 10 V = Power ON
Properties
| Type: | Enclosed |
|---|---|
| No. of Output Voltages: | 1 - Single |
| Application: | Industrial, IT Technology |
| Protection Class: | Protection Class I |
| Input Connector: | Screw Terminal |
| Output Connector: | Screw Terminal |
| For Region: | Europe, USA / Canada |
Downloads
External Power Supplies (Plug-in and Desktop Power Supplies)
Find practical answers to frequently asked questions about our external plug-in and desktop power supplies for industrial, medical, and IT applications. These articles support you with selecting the appropriate model, navigating country-specific mains plug options, and ensuring safe commissioning and troubleshooting.
Worauf muss ich bei der Auswahl eines passenden externen Netzteils achten?
For an external power supply unit (e.g. a desktop power supply) to operate safely, four criteria must match your device: voltage, current, polarity, and connector dimensions. You will usually find the required ratings on your device’s rating plate (typically under "Input") or on your previous power supply under "Output".
- Voltage (volts / V) – must match exactly: The output voltage of the power supply unit must match your device's input voltage precisely. Excessive voltage can permanently damage the electronics; insufficient voltage will cause the device not to start or to run unstably.
- Current (amperes / A) – may be higher: The power supply unit must supply at least the current required by the device. A higher ampere or wattage rating on the power supply poses no risk, as the device only draws the current it actually requires.
- Polarity – must match: Check the polarity symbol on the device. DC barrel connectors are usually centre-positive (positive pole inside). The replacement power supply must have identical polarity.
- Connector dimensions (DC barrel connector): The connector must fit securely and smoothly into the socket. Common dimensions specify the outer and inner diameters (e.g. 5.5 × 2.1 mm or 5.5 × 2.5 mm). If socket dimensions are non-standard or unclear, universal power supplies with an adapter set can help.