Switch Mode Power Supply SUNPOWER SPS G018
Item number: 820339
Voltage:
24 V
Current:
0.75 A
Power:
18 W
Features:
Enclosed
Stock:
230
Switch Mode Power Supply SUNPOWER SPS G018
Design
- Standard mounting bracket, compatible with products from other power supply manufacturers
- Very long service life due to the use of high-quality components, e.g., Nippon Chemi-Con capacitors, resulting in a high MTBF rate
- Protection against overload, overvoltage, and short circuit with automatic restart
- International use thanks to universal voltage input from 85 to 265 V AC / 47 – 63 Hz or 120 to 375 V DC
- Extended temperature range up to 70 °C with derating
- High efficiency, no-load power < 0.15 W
- High efficiency thanks to modern circuit design
- Tested according to EN 62368-1 for IT and audio/video equipment
Properties
| Type: | Enclosed |
|---|---|
| No. of Output Voltages: | 1 - Single |
| Application: | Industrial, IT Technology |
| Protection Class: | Protection Class I |
| Input Connector: | Screw Terminal |
| Output Connector: | Screw Terminal |
| For Region: | Europe, USA / Canada |
Downloads
FAQ
External Power Supplies (Plug-in and Desktop Power Supplies)
Find practical answers to frequently asked questions about our external plug-in and desktop power supplies for industrial, medical, and IT applications. These articles support you with selecting the appropriate model, navigating country-specific mains plug options, and ensuring safe commissioning and troubleshooting.
Worauf muss ich bei der Auswahl eines passenden externen Netzteils achten?
For an external power supply unit (e.g. a desktop power supply) to operate safely, four criteria must match your device: voltage, current, polarity, and connector dimensions. You will usually find the required ratings on your device’s rating plate (typically under "Input") or on your previous power supply under "Output".
- Voltage (volts / V) – must match exactly: The output voltage of the power supply unit must match your device's input voltage precisely. Excessive voltage can permanently damage the electronics; insufficient voltage will cause the device not to start or to run unstably.
- Current (amperes / A) – may be higher: The power supply unit must supply at least the current required by the device. A higher ampere or wattage rating on the power supply poses no risk, as the device only draws the current it actually requires.
- Polarity – must match: Check the polarity symbol on the device. DC barrel connectors are usually centre-positive (positive pole inside). The replacement power supply must have identical polarity.
- Connector dimensions (DC barrel connector): The connector must fit securely and smoothly into the socket. Common dimensions specify the outer and inner diameters (e.g. 5.5 × 2.1 mm or 5.5 × 2.5 mm). If socket dimensions are non-standard or unclear, universal power supplies with an adapter set can help.